Gold Coast & SEQ – Fixed price & Free Quotes – 24/7 call outs

Commercial Thermal Imaging Inspections and Reporting

Electrical connections don’t fail without warning, they run hot for months first. A thermal scan finds the loose or overloaded connection while it’s still a repair, not a switchboard fire and an insurance claim.

You get the images, the temperature readings and a written report on what needs attention and what doesn’t.

Level 1 thermography from licensed QLD electrical contractors with over 20+ years across commercial, strata and body corporate work. Call today to see how we can save help you prevent costly downtime and electrical issues before they arise.

Get a Free Quote
Call Us

Why Gold Coast homeowners choose Knight Electrical Solutions

Get a Free Quote
Call Us

Lifetime Warranty
On Workmanship

Quality work you can rely on, backed by a lifetime workmanship warranty.

Fixed
Price Quotes

Clear, upfront pricing so you know exactly what to expect, with no hidden surprises.

Licensed
Electrical Contractor

Fully licensed and qualified to carry out safe, compliant electrical work in your home.

20 Years Of
Experience

Trusted experience across a wide range of residential electrical work, from small repairs to full home installations.

24/7 Emergency Call
Out Service

Available when you need it most, for urgent home electrical issues and unexpected faults.

Our Qualifications

Registered QLD
Electrician

QLD Electrical
Contractor Licence

PLC and
Instrumentation

Level 1 Thermal
Imaging Photography

What Commercial Thermal Imaging Finds:

Electrical connections fail in a predictable sequence: a termination loosens, resistance rises, the joint heats, and eventually it arcs or burns out. That sequence takes months and is completely invisible until the last step.

Thermal imaging catches it in the middle.

The most common issues we typically discover when doing thermal imaging on Gold Coast commercial sites are loose or under-tightened terminations, corroded connections, failing circuit breakers and contactors, overloaded circuits, unbalanced three-phase loads, poor crimps and degraded busbar joints.

All of these present as a temperature difference against the surrounding equipment or against the equivalent phase, which is the comparison that actually matters. A single hot terminal on one phase when the other two are cool is a finding. A whole board running warm is a different finding.

How it works

Get a Free Quote
Call Us

01

Get in touch

Give us a call or send through an enquiry to book a time.

02

On-site assessment

We assess the job properly and talk you through the best way to get it sorted.

03

Upfront Quoting

You’ll get a clear, fixed price quote before any work begins.

04

Work carried out

The job is completed safely, properly, and as agreed.

05

Clean and tidy

Everything is cleaned up and all rubbish is removed.

06

Final check and handover

We walk you through the work and make sure you’re happy before wrapping up.

07

Payment on the spot

Simple and secure payment once the job is completed.
For larger jobs over $5,000 in materials that span multiple days, a deposit may be requested when the quote is accepted.

WHAT CLIENTS SAY ABOUT KNIGHT ELECTRICAL SOLUTIONS

COMMON FAQ

Here are a list of common questions we get asked by our Gold Coast Homeowners and Businesses

Commercial thermal imaging uses an infrared camera to detect heat from faults in your electrical system – loose connections, overloaded circuits and failing components that run hot before they fail. For businesses, an undetected fault can mean a fire, costly downtime or destroyed equipment. A non-invasive thermal scan catches these problems early, so you can fix them on your schedule rather than during an emergency shutdown.
For most commercial premises, an annual thermal inspection is a sensible baseline – more often for high-load operations, ageing infrastructure, critical facilities, or as part of an insurer’s requirement. Regular scans build a record of your switchboard and system health and catch developing faults early. We’ll recommend a frequency based on your building’s age, load and risk profile.
Many electrical fires and unplanned outages start from connections and components that overheat quietly for weeks before failing. Thermal imaging detects that heat early, so faults are repaired before they cause a fire or shut you down. For a business, avoiding one unplanned outage or fire easily justifies the cost of regular scans – it’s proactive risk management, not just a check-up.
No. Thermal imaging is non-contact and non-invasive – we scan your switchboards, distribution boards and circuits while they run under normal load, which is exactly when faults reveal themselves as heat. There’s no need to shut down or power off. Your business keeps operating while we identify any hidden issues, making it one of the least disruptive inspections available.
Some commercial insurers require or look favourably on regular thermal inspections as evidence of proactive electrical risk management, and a documented scan can support claims and renewals. Requirements vary by insurer, so check your policy. Either way, a thermal report demonstrates due diligence and can help you avoid the faults that lead to claims in the first place. We provide the documentation you need.
Your report documents the areas scanned, any hot spots found with thermal images, the severity, and clear recommendations for repair. It gives you a defensible record for insurers, auditors and your own maintenance planning, plus a prioritised action list. You’ll know exactly what was checked, what was found, and what needs attention, without any technical guesswork.
A commercial scan reveals loose or corroded connections, overloaded and unbalanced circuits, failing breakers and contactors, and overheating components across your switchboards and distribution. These are the faults behind most electrical fires and unplanned outages, and they’re often invisible until they fail. Catching them while they’re just “running hot” turns a potential disaster into a scheduled, minor repair.
Cost depends on the size of your premises and the number of boards and circuits to be scanned. We provide fixed-price quotes and a documented report, and can build thermal imaging into an ongoing maintenance program for better value. Call 0421 333 034 to arrange an inspection – a small cost against the price of downtime, equipment loss or an electrical fire.

OUR SERVICE AREA

Our local electricians service all suburbs of the Gold Coast, SEQ and Tweeds Head regions.

Get a Free Quote

Need commercial electrical services?
Clear advice. Upfront pricing. No surprises.

Get a Free Quote
Call Us