Gold Coast – fixed price – 24/7
Ceiling Fan Installation Gold Coast
Indoor and outdoor ceiling fans installed, replaced and repaired across the Gold Coast. Our licensed electricians check the point, the mounting and the ceiling height, then install your fan properly at a fixed price.
- QLD licence 1511406
- Fixed price before work starts
- Lifetime workmanship warranty
- 24/7 emergency call-outs
Fan wobbling badly, sparking or smelling of burning?Switch it off and stop using it. Turn off that circuit at the switchboard if it's safe, or call 000 if there's smoke or fire.
Call 0421 333 034What Clients Say About Knight Electrical Solutions
Can You Put a Ceiling Fan Where Your Light Is?
Usually, yes. The ceiling point has to carry the fan's load, the mounting has to take its weight, and the ceiling has to be high enough.
We check all three on site before we quote.
If one fails, we tell you what fixes it, with a fixed price before work starts.
Get It Fixed
- Fan wobbling or clicking
- Burning smell from the motor
- Fan trips the safety switch
- Won't start or runs slow
- Remote or wall control dead
Good Reasons to Install
- Swap a light for a fan
- Bedroom with no fan
- Patio or alfresco area
- Old fan rusting or noisy
- Fan and light on one switch
- Low or raked ceiling
Ceiling Fan Work We Do
Most jobs are a fan going where a light was. Some need a stronger mounting or a new ceiling point.
Light to Fan Swaps
A fan fitted where your light is, once the point and mounting pass our checks.
New Fan Points
No ceiling point in the room? We run a new one from a suitable circuit.
Fan Replacements
Old, noisy or rusted fans out, new ones in. We reuse the point if it's sound.
Wobbling and Dead Fans
Unbalanced blades, loose mountings and failed motors or controls found and fixed.
Outdoor and Alfresco Fans
Fans rated for outdoor and coastal use on patios, decks and alfresco areas.
Outdoor lightingSeparate Fan and Light Control
A second switch, a remote or a wall controller, depending on your wiring.
Why Gold Coast Homeowners and Businesses Choose Knight Electrical Solutions
Price Quoted on Site
We inspect first. The quote is the number you pay.
Workmanship Warranty
If our work fails, we come back and fix it.
Emergency Call-Outs
Based in Palm Beach, so same-day is often possible.
Licensed and Insured
QLD Electrical Contractor Licence, fully insured.
Years' Experience
Residential, commercial and industrial work.
Pay on Completion
Paid on site when the job's done. No invoice to chase.
What Queensland Says About Ceiling Fans
From the Electrical Safety Office and the Electrical Safety Regulation 2026.
Swapping a Light for a Fan Is Electrical Work
The Electrical Safety Office lists replacing a light fitting with a ceiling fan as electrical work. It must be done by a licensed electrician.
Can I install a fan myself?Source: Electrical Safety Office
DIY Wiring Can Affect Your Insurance
If a fire results from illegal electrical work, your insurer may refuse the claim.
Source: Electrical Safety Office
Bought Your Own Fan?
Buying a fan yourself isn't illegal, but it must be connected by a licensed electrician. We check it suits the room before we fit it.
Source: Electrical Safety Office
No Safety Switch on Your Power Points?
In a home with no safety switch on the general power points, an electrician generally can't do installation work unless the job includes fitting one. Emergency and safety work are among the exceptions.
Source: Electrical Safety Regulation 2026, s 30
Ceiling Spaces Have Hidden Hazards
Some circuits may still be live with the main switches off. Roof spaces can also hold heat, vermin, sharp objects or asbestos-containing materials.
Test Your Safety Switches
Press each test button every three months. If it doesn't trip, it's faulty and needs a licensed electrician to check it.
Source: Electrical Safety Office
A plain-English summary, not legal advice. More on the rules in what you can legally DIY in QLD.
Byron Knight
Director, Knight Electrical Solutions
Byron has more than 20 years of hands-on experience across residential, commercial and industrial electrical work, from family homes and rural properties to large-scale projects. That depth shows in how quickly and accurately he gets to the cause of a fault.
He has run his own electrical business before, so he knows what it takes to lead a job from the first call to a clean handover. He's also trained in PLC and instrumentation and qualified in Level 1 thermal imaging, so complex jobs are well within his wheelhouse.
What drives him is quality: neat, safe work, straight advice and a finished job he's proud to put the Knight name to. Do it once, do it right.
- QLD Electrical Contractor Licence 1511406
- 20+ years' experience
- PLC and instrumentation
- Level 1 thermal imaging
How It Works
- Get in Touch
Tell us how many fans and which rooms.
- On-Site Check
We check the point, the mounting and ceiling height.
- Fixed Price
One figure before work starts. No hourly rate.
- Pick Your Fan
We supply one, or install the fan you've bought.
- Fan Installed
Mounted, wired, balanced and tested.
- Pay on Completion
EFTPOS on site when you're happy.
For larger jobs over $5,000 in materials that span multiple days, a deposit may be requested when the quote is accepted.
What Sets the Price of a Ceiling Fan Install
A swap where a good point already exists usually costs least. A new point in a room with no wiring usually costs most.
Read our ceiling fan cost guide- Existing point. A sound light point keeps the job simple.
- Mounting. A light mounting may need reinforcing to carry a fan.
- New cable run. No ceiling point means a new run from a circuit.
- Ceiling type. Raked, high or low ceilings take more checking and fitting.
- Roof access. Tight or no roof space takes longer to wire.
- Control. Remote, wall controller or a second switch.
- Number of fans. Several fans in one visit share the setup time.
Units and strata
Ceiling Fans in Units and Apartment Buildings
In units and high-rise apartments, we work around building access rules and the body corporate. Our electricians also handle repairs in common areas and across multi-residential buildings.
Ceiling Fan FAQ
Questions Gold Coast homeowners ask us about installing and fixing ceiling fans.
Can I install a ceiling fan myself in Queensland?
No. The Electrical Safety Office lists replacing a light fitting with a ceiling fan as electrical work, and electrical work must be done by a licensed electrician. Unlicensed electrical work is illegal, and your insurer may refuse a claim if a fire results from it. You can buy the fan yourself. We'll check it suits the room, then install it.
How much does ceiling fan installation cost on the Gold Coast?
It depends on what's already in the ceiling, so we price it on site. A fan going onto a sound light point usually costs least. A mounting that needs reinforcing costs more, and a room with no ceiling point needs a new cable run, which usually costs the most. Ceiling type, roof access and the control you want also matter. You get one fixed price before work starts.
Will you install a fan I've bought myself?
Yes. We check it first to make sure it suits the spot, including the room size, ceiling height and whether it's rated for where it's going. Outdoor and coastal areas need a fan made for those conditions, or salt air can corrode it. Look for the Regulatory Compliance Mark (RCM) when you buy. We install it, balance it and test it.
How high does my ceiling need to be for a ceiling fan?
High enough to leave safe clearance between the blades and the floor, and around the room. Standard-height ceilings are often fine. Low ceilings and raked ceilings need checking, and on a raked ceiling the mounting angle matters too. We measure the height and check the fan maker's installation requirements before we quote, so there are no surprises on the day.
Can I have the fan and light on separate switches?
Usually, yes. The options depend on the wiring in the room. We can run a second cable for a separate wall switch, fit a fan with a remote, or install a wall controller. A remote is usually the simplest because it needs no new cable in the wall. We tell you which options suit your room during the site visit.
How long does a ceiling fan installation take?
A straight swap onto a sound point is usually quick. Reinforcing a mounting takes longer, and a new ceiling point depends on how easy the roof space is to get into. Several fans in one visit are faster per fan. We can give you a rough timeframe when we quote, so you know how long we'll be there and when the power will be off.
Why is my ceiling fan wobbling?
Usually an unbalanced or bent blade, loose blade screws, or a loose mounting. Poor original installation is another common cause. Switch the fan off and stop using it if the wobble is bad or getting worse, and don't try to fix the mounting yourself. We check the bracket, the mounting and the blades, then rebalance or replace what's needed so it runs smoothly.
Can you install ceiling fans outside on a patio or alfresco?
Yes, as long as the fan is rated for outdoor use. Indoor fans can corrode in Gold Coast salt air and aren't made to handle damp. We check the mounting point, cable route, weather exposure and the circuit the fan will connect to before we quote. Fans and lights can be fitted together on a patio, so you get airflow and light from one ceiling point.
Our Service Area
Our electricians cover the whole Gold Coast and Tweed Heads.
- Gold Coast
- Ashmore
- Austinville
- Benowa
- Biggera Waters
- Bilinga
- Bonogin
- Broadbeach
- Bundall
- Burleigh Heads
- Burleigh Waters
- Carrara
- Coolangatta
- Coombabah
- Currumbin
- Currumbin Waters
- Elanora
- Helensvale
- Highland Park
- Hollywell
- Hope Island
- Kirra
- Labrador
- Main Beach
- Mermaid Beach
- Mermaid Waters
- Merrimac
- Miami
- Molendinar
- Mudgeeraba
- Nerang
- Nobby Beach
- Palm Beach
- Paradise Point
- Reedy Creek
- Robina
- Runaway Bay
- Southport
- Surfers Paradise
- Tallai
- Tallebudgera
- Tugun
- Tweed Heads
- Varsity Lakes
- Worongary
Get Your Ceiling Fan Quoted
We'll check the point, the mounting and the ceiling, then give you a fixed price before any work starts.
0421 333 034
If anyone is in danger, has had an electric shock, or you can see fire, sparks or fallen powerlines, call Triple Zero (000) immediately. Don’t touch anyone who may be in contact with live electricity.
Important disclaimer
The information on this page is general and is not advice for your property. Summaries of Queensland law and standards are drawn from the official sources linked on this page, and may change; the official sources prevail. Regulations, Australian Standards and safety requirements change, and errors can occur, so have a licensed electrician assess your situation in person before acting on anything here. Electrical work in Queensland must only be done by a licensed electrician. If you think something here is wrong or out of date, call 0421 333 034 or email byron@knightes.au and we'll review it. To the extent permitted by law, Knight Electrical Solutions accepts no liability for loss or damage arising from reliance on this information.