Gold Coast – fixed price – 24/7
Safety Switch Testing Gold Coast
A safety switch can trip on its test button and still be too slow to protect you. We test your RCDs with proper equipment so you know they'll do their job. Many landlords, workplaces and homeowners rely on safety switches that have never been tested.
- QLD licence 1511406
- Fixed price before work starts
- Lifetime workmanship warranty
- 24/7 emergency call-outs
Safety switch won't stay on?Leave it off and call an electrician. If anyone has had a shock, call 000.
Call 0421 333 034What Clients Say About Knight Electrical Solutions
Are Your Safety Switches Working?
A timed trip test with a meter checks how fast each safety switch trips. The test button only shows that it can trip.
You should still press each test button every three months.
We test your safety switches with a meter, explain the results, and quote a fixed price for any that fail.
Call Us Today
- Won't trip on the test button
- Won't reset after tripping
- Trips again straight away
- Burning smell at the board
- Water in or near the board
Book a Test
- Never been time-tested
- Only one safety switch
- Buying, selling or renting
- Old board with fuses
- Workplace test due
- Strata common property
Safety Switch Work We Do
We find your safety switches and what each one protects, then trip-test them with a meter.
Timed Trip Testing
Each safety switch tripped with a test meter and its trip time measured, not just the button pressed.
Results Explained
We tell you which switches passed, which need attention, and what each one protects.
Failed Switch Replacement
If a switch fails, we tell you and give you a fixed price to replace it.
Adding Safety Switches
Power point circuits with no protection? We fit safety switches or RCBOs.
Switchboard upgradesNuisance Tripping
We look for the circuit or appliance that's tripping the switch.
Why it keeps trippingWorkplace and Strata Testing
Circuits tested in sequence, planned around how your site operates.
Strata electriciansWhat the Rules Say About Safety Switches
From the Electrical Safety Regulation 2026, in force since 1 September 2026, and Queensland's Electrical Safety Office.
You've Just Bought a Home
You have 90 days from taking possession to fit a safety switch to the power point circuits. The seller must tell you in writing whether there is one.
Source: Electrical Safety Regulation 2026, ss 26 and 28
You're Renting It Out
No safety switch on the power points? You have 90 days from the start of a new tenancy to fit one.
Source: Electrical Safety Regulation 2026, s 29
You're Having Electrical Work Done
With a few exceptions, such as emergency or safety work, an electrician can't do installation work in a home with no safety switch on the power points unless the job includes fitting one.
Source: Electrical Safety Regulation 2026, s 30
Press the Button Every Three Months
If the switch doesn't trip when you press the button, it's faulty. Get a licensed electrician to check it.
Source: Electrical Safety Office
Protect Every Circuit
The regulator recommends safety switches on all circuits: power points, lighting, air conditioning, stove, hot water and pool equipment. The sale and rental rules cover power points only.
Source: Electrical Safety Office
Workplaces Have Separate Rules
The regulation has workplace safety switch rules that vary by type of work, including office, service, manufacturing and construction work. Ask us which apply to your site.
Source: Electrical Safety Regulation 2026, pt 6
A plain-English summary, not legal advice. Selling? Read do you need a safety switch to sell a house in QLD.
How It Works
- Get in Touch
Tell us about the property and its boards.
- Fixed Price
One figure before work starts. No hourly rate.
- Plan the Switch-Offs
We tell you which circuits go off, and when.
- Test the Switches
Each one trip-tested with a meter.
- Results Explained
Passes, fails and a fixed price for any replacements.
- Pay on Completion
EFTPOS on site when you're happy.
For larger jobs over $5,000 in materials that span multiple days, a deposit may be requested when the quote is accepted.
What Sets the Price of Safety Switch Testing
We quote once we know what's on site. These are the things that move the number.
- Number of switches. More safety switches and RCBOs, more tests to run.
- Number of boards. Sub-boards and separate meter boards add time.
- Type of site. Workplaces and strata buildings usually take longer than a home.
- Timing. After-hours testing to keep a business running.
- Failed switches. Replacements are quoted separately, at a fixed price.
- Board condition. An old fuse board with no safety switches may need an upgrade first.
Commercial and strata
Safety Switch Testing for Workplaces and Body Corporates
Testing a safety switch turns off the circuits it protects. For shops, offices and strata buildings, we test in sequence and tell you before anything switches off.
Why Gold Coast Homeowners and Businesses Choose Knight Electrical Solutions
Price Quoted on Site
We inspect first. The quote is the number you pay.
Workmanship Warranty
If our work fails, we come back and fix it.
Emergency Call-Outs
Based in Palm Beach, so same-day is often possible.
Licensed and Insured
QLD Electrical Contractor Licence, fully insured.
Years' Experience
Residential, commercial and industrial work.
Pay on Completion
Paid on site when the job's done. No invoice to chase.
Byron Knight
Director, Knight Electrical Solutions
20+ years in electrical work across Australia and New Zealand, including running his own business in Auckland.
Safety Switch Testing FAQ
Questions Gold Coast homeowners, landlords and businesses ask us about safety switches.
How often should safety switches be tested?
At home, press the test button on each safety switch every three months. That's the Electrical Safety Office's advice. Workplaces have separate rules under the Electrical Safety Regulation 2026 that depend on the type of work. The button only shows a switch can trip. A timed test with a meter measures how fast it trips, so it's worth having one done by a licensed electrician.
Isn't pressing the test button enough?
Not completely. The button proves the switch can trip. It doesn't measure how quickly it trips when current leaks to earth, which is what protects someone from a shock. A switch can pass the button test and still be slow. A timed trip test uses a meter to pass a small test current and measure the response. Keep pressing the button every three months, and consider a timed test too.
Do I legally need a safety switch in Queensland?
For many homes, yes. Under the Electrical Safety Regulation 2026, a new owner must have an approved safety switch on the power point circuits within 90 days of possession, and a landlord within 90 days of a new tenancy. With a few exceptions, an electrician also can't do installation work in a home without one unless the job includes fitting it. Those rules cover power points, but the regulator recommends all circuits.
What happens if a safety switch fails the test?
We tell you and give you a fixed price to replace it. Until it's replaced, the circuits it covers may have no earth leakage protection. If you press the test button at home and the switch doesn't flick off, the Electrical Safety Office says it's faulty and you need a licensed electrician to check it. Don't assume a switch that hasn't tripped in years is working.
How much does safety switch testing cost on the Gold Coast?
It depends on the property, so we quote once we know what's there. The main factors are how many safety switches and RCBOs you have, how many boards and sub-boards they're spread across, the type of site, and whether testing has to happen after hours. You get one fixed price before work starts, with no hourly rate. Any failed switch is quoted separately.
Why does my safety switch keep tripping?
Often an appliance or circuit is leaking current to earth, and the safety switch is doing its job. Water in outdoor power points, a failing hot water element or a worn appliance are common causes. You can try resetting it once. If it trips again straight away, leave it off and call a licensed electrician. Don't keep resetting it, and never bypass it.
Who is responsible for safety switch testing in a workplace?
Generally the business running the workplace. The Electrical Safety Regulation 2026 requires a person conducting a business or undertaking to manage electrical risks at the workplace, and Part 6 sets safety switch rules that vary by type of work. Keeping track of when tests are due is the part that often slips. Tell us about your site and the work done there, and we'll quote the testing.
Can you test safety switches without shutting my business down?
Mostly, yes. Each test trips the circuits that switch protects, so we test in sequence and plan the order around how you operate. We tell you before anything switches off. Circuits feeding critical equipment such as fridges, servers or medical gear can be tested outside trading hours. For strata buildings, we can test common property boards with the price agreed before work starts.
Our Service Area
Our electricians cover the whole Gold Coast and Tweed Heads.
- Gold Coast
- Ashmore
- Austinville
- Benowa
- Biggera Waters
- Bilinga
- Bonogin
- Broadbeach
- Bundall
- Burleigh Heads
- Burleigh Waters
- Carrara
- Coolangatta
- Coombabah
- Currumbin
- Currumbin Waters
- Elanora
- Helensvale
- Highland Park
- Hollywell
- Hope Island
- Kirra
- Labrador
- Main Beach
- Mermaid Beach
- Mermaid Waters
- Merrimac
- Miami
- Molendinar
- Mudgeeraba
- Nerang
- Nobby Beach
- Palm Beach
- Paradise Point
- Reedy Creek
- Robina
- Runaway Bay
- Southport
- Surfers Paradise
- Tallai
- Tallebudgera
- Tugun
- Tweed Heads
- Varsity Lakes
- Worongary
Get Your Safety Switches Tested
We'll trip-test your safety switches, explain the results, and fix the price of any repairs before we start.
0421 333 034
If anyone is in danger, has had an electric shock, or you can see fire, sparks or fallen powerlines, call Triple Zero (000) immediately. Don’t touch anyone who may be in contact with live electricity.
Important disclaimer
The information on this page is general and is not advice for your property. Summaries of Queensland law and standards are drawn from the official sources linked on this page, and may change; the official sources prevail. Regulations, Australian Standards and safety requirements change, and errors can occur, so have a licensed electrician assess your situation in person before acting on anything here. Electrical work in Queensland must only be done by a licensed electrician. If you think something here is wrong or out of date, call 0421 333 034 or email byron@knightes.au and we'll review it. To the extent permitted by law, Knight Electrical Solutions accepts no liability for loss or damage arising from reliance on this information.