Gold Coast – fixed price – 24/7
Oven Cooktop Installation Gold Coast
If your new oven or cooktop is hardwired, connecting it and disconnecting the old one is licensed electrical work in Queensland. Our licensed electricians check the circuit can carry the new appliance, connect it and test it, whether it’s a straight swap or a move to induction. When we leave, the kitchen is ready to cook in.
- QLD licence 1511406
- Fixed price before work starts
- Lifetime workmanship warranty
- 24/7 emergency call-outs
Oven or cooktop sparking, smoking or giving a tingle?Stop using it. For a tingle, keep off the switchboard and call Energex on 13 19 62. Fire or injury: call 000.
Call 0421 333 034What Clients Say About Knight Electrical Solutions
Do You Need an Electrician to Install an Oven or Cooktop?
Yes, if it's hardwired. In Queensland, only a licensed electrician can connect a hardwired oven or cooktop.
Going to induction? The circuit may need upgrading first.
We check the circuit, connect the appliance and test it, with a fixed price before work starts.
Call Us First
- Swapping gas for induction
- Bigger oven or cooktop
- Moving the appliance
- No safety switch at home
- Old board with fuses
Straight Swap
- Same size, same spot
- Hardwired replacement
- New wall oven
- Rangehood replacement
- Old unit disconnected
Read what a kitchen renovation needs electrically or why a rangehood stops working.
Oven and Cooktop Work We Do
We check the existing circuit before anything is connected. That tells us whether it's a straight swap or the circuit needs work.
Oven Connections
Wall and freestanding ovens hardwired, connected and tested before we leave.
Cooktop Connections
Electric and ceramic cooktops connected, with the old unit disconnected.
Switching to Induction
We check whether your circuit can carry an induction cooktop, and run a new one if needed.
Rangehoods
Replacement rangehoods connected. A new outlet or supply where needed.
Rangehood installation and repairsDedicated Circuits
A new circuit from the switchboard when the appliance needs its own supply.
New circuits and wiringFaulty Appliances
Oven tripping or stopped working? Our appliance electricians test it.
Appliance electricianWhy Gold Coast Homeowners and Businesses Choose Knight Electrical Solutions
Price Quoted on Site
We inspect first. The quote is the number you pay.
Workmanship Warranty
If our work fails, we come back and fix it.
Emergency Call-Outs
Based in Palm Beach, so same-day is often possible.
Licensed and Insured
QLD Electrical Contractor Licence, fully insured.
Years' Experience
Residential, commercial and industrial work.
Pay on Completion
Paid on site when the job's done. No invoice to chase.
What the Rules Say About Ovens and Cooktops
From Queensland's Electrical Safety Office, the Electrical Safety Regulation 2026 and the QBCC.
Hardwired Means an Electrician
You can fit a wall oven into its cabinet yourself. Connecting a hardwired appliance to the wiring is for a licensed electrician.
No Safety Switch on the Power Points
With limited exceptions, an electrician can't do installation work in a home with no safety switch on the power points unless the job includes fitting one.
Safety switch installationSource: Electrical Safety Regulation 2026, s 30
Gas Needs a Gasfitter
Installing, altering or repairing a gas system is gasfitting work and needs a gasfitting licence. Swapping gas for induction? The gas side needs a licensed gasfitter.
Source: QBCC, Gasfitting
A plain-English summary, not legal advice. Wondering what you can do yourself? Read what you can legally do yourself in QLD.
Byron Knight
Director, Knight Electrical Solutions
Byron has more than 20 years of hands-on experience across residential, commercial and industrial electrical work, from family homes and rural properties to large-scale projects. That depth shows in how quickly and accurately he gets to the cause of a fault.
He has run his own electrical business before, so he knows what it takes to lead a job from the first call to a clean handover. He's also trained in PLC and instrumentation and qualified in Level 1 thermal imaging, so complex jobs are well within his wheelhouse.
What drives him is quality: neat, safe work, straight advice and a finished job he's proud to put the Knight name to. Do it once, do it right.
- QLD Electrical Contractor Licence 1511406
- 20+ years' experience
- PLC and instrumentation
- Level 1 thermal imaging
How It Works
- Get in Touch
Send us the model and where it's going.
- Check the Circuit
We check the cable, breaker and switchboard space.
- Fixed Price
One figure before work starts. No hourly rate.
- Old One Disconnected
Power off at the circuit, old appliance disconnected.
- New One Connected
Hardwired and tested before we leave.
- Pay on Completion
EFTPOS on site when you're happy.
For larger jobs over $5,000 in materials that span multiple days, a deposit may be requested when the quote is accepted.
What Sets the Price of Oven and Cooktop Installation
We don't price an install until we've seen the circuit. These are the things that move the number.
- Straight swap or not. Same spot and same load is the simplest job.
- Existing circuit. An induction cooktop may need a bigger circuit.
- Distance to the board. Longer cable runs take more time and material.
- Switchboard space. No room for a new circuit may mean board work.
- Safety switch. Homes without one may need it fitted first.
- Extra appliances. A rangehood or second oven at the same visit.
Commercial kitchens
Cooking Equipment for Cafes and Commercial Kitchens
Replacing an oven or cooktop in a cafe or restaurant? We check the circuit, connect the new equipment and talk through timing with you so it fits around trading.
Oven and Cooktop Installation FAQ
Questions Gold Coast homeowners ask us before a new oven or cooktop arrives.
Do I need an electrician to install an oven in Queensland?
Yes, if the oven is hardwired. Queensland's Electrical Safety Office says fitting a wall oven into a kitchen cabinet isn't electrical work, but connecting a hardwired appliance must be done by a licensed electrician. Disconnecting the old hardwired oven is electrical work too. We disconnect the old one, check the circuit can carry the new one, then connect and test it.
What if my new oven has a plug?
A plug-in oven can usually go into a suitable power point without an electrician. Check the rating plate or manual against the outlet before delivery day, because some ovens need a higher-rated outlet. You'll need an electrician if there's no suitable outlet, the outlet has to move, or the appliance is hardwired. We can fit the right outlet or a dedicated circuit.
Can I swap a gas cooktop for induction?
Yes, but the gas side isn't electrical work. Installing, altering or repairing a gas system is gasfitting work, which needs a gasfitting licence in Queensland, so you'll need a licensed gasfitter for that part. Induction cooktops often need their own circuit from the switchboard, sometimes a bigger one than the kitchen has. We check the electrical side and quote it before you buy.
Will my switchboard handle an induction cooktop?
It depends on the board, the existing cable and whether there's space for a new circuit. Some boards can take an induction cooktop as they are. Older boards with fuses or no spare room may need upgrading first. We check on site and include any switchboard work in the fixed price, so you know the full cost before the cooktop goes in.
Does the appliance retailer connect it for me?
Sometimes. Check whether the price includes connection by a licensed electrician and disconnection of the old appliance. Some retailers deliver only, which can leave you with a new hardwired oven and nobody to connect it. If connection isn't included, book an electrician before delivery day. Send us the model number and we'll check the circuit suits it.
Do you install rangehoods?
Yes. We install and replace rangehoods, including adding a power point or hardwired supply above the cooktop where one is needed. If your current rangehood has stopped working, we can test whether the fault is in the unit or the power supply before you buy a new one. That way you don't replace a rangehood that only needed its power fixed.
How much does oven or cooktop installation cost?
It depends on the job, so we don't quote over the phone. The main factors are whether it's a straight swap, whether the existing circuit can carry the new appliance, how far it is from the switchboard and whether the board has space. We check on site, then give you one fixed price before work starts. You pay on completion by EFTPOS.
My new oven trips the safety switch. What should I do?
Stop using the oven and leave the safety switch off. A safety switch trips when it detects current leaking to earth, and that could be a fault in the oven, the connection or the circuit. Don't keep resetting it. If anyone gets a tingle or shock, call Energex on 13 19 62, or 000 if someone is hurt. Then call a licensed electrician.
Our Service Area
Our electricians cover the whole Gold Coast and Tweed Heads.
- Gold Coast
- Ashmore
- Austinville
- Benowa
- Biggera Waters
- Bilinga
- Bonogin
- Broadbeach
- Bundall
- Burleigh Heads
- Burleigh Waters
- Carrara
- Coolangatta
- Coombabah
- Currumbin
- Currumbin Waters
- Elanora
- Helensvale
- Highland Park
- Hollywell
- Hope Island
- Kirra
- Labrador
- Main Beach
- Mermaid Beach
- Mermaid Waters
- Merrimac
- Miami
- Molendinar
- Mudgeeraba
- Nerang
- Nobby Beach
- Palm Beach
- Paradise Point
- Reedy Creek
- Robina
- Runaway Bay
- Southport
- Surfers Paradise
- Tallai
- Tallebudgera
- Tugun
- Tweed Heads
- Varsity Lakes
- Worongary
Get Your Oven or Cooktop Connected
Send us the model and we'll check the circuit and give you a fixed price before any work starts.
0421 333 034
If anyone is in danger, has had an electric shock, or you can see fire, sparks or fallen powerlines, call Triple Zero (000) immediately. Don’t touch anyone who may be in contact with live electricity.
Important disclaimer
The information on this page is general and is not advice for your property. Summaries of Queensland law and standards are drawn from the official sources linked on this page, and may change; the official sources prevail. Regulations, Australian Standards and safety requirements change, and errors can occur, so have a licensed electrician assess your situation in person before acting on anything here. Electrical work in Queensland must only be done by a licensed electrician. If you think something here is wrong or out of date, call 0421 333 034 or email byron@knightes.au and we'll review it. To the extent permitted by law, Knight Electrical Solutions accepts no liability for loss or damage arising from reliance on this information.